驱动枚举所有进程所有模块，删除指定进程。_驱动开发技术_看流星社区 www.kanliuxing.com

df001 发表于 2018-2-27 21:52:42

驱动枚举所有进程所有模块，删除指定进程。

环境： VS2008中配置WDK7600驱动开发环境

包含文件 #include <ntifs.h> #include <WinDef.h>
需要在 #include <ntddk.h> 之前那么就不会出错

程序大体流程：
PsGetCurrentProcess() 得到本进程EPROCESS
通过EPROCESS +0x174 得到进程名
通过EPROCESS +0x84得到进程ID

PsLookupProcessByProcessId 通过进程ID 得到这个ID的 EPROCESS
MmGetSystemRoutineAddress得到 PsGetProcessPeb的函数地址
PsGetProcessPeb 通过进程的 EPROCESS得到进程的PEB 然后再得到PEB的LDR
保存APC状态（Asynchronous procedure call，异步程序调用）KeStackAttachProcess(EPROCESS , &KAPC);
通过ldr 得到内存加载链表InMemoryOrderModuleList 通过它循环遍历模块
pListEntryStart = pListEntryEnd = pPebLdrData->InMemoryOrderModuleList.Flink
pLdrDataEntry = (PLDR_DATA_TABLE_ENTRY)CONTAINING_RECORD(pListEntryStart,LDR_DATA_TABLE_ENTRY, InMemoryOrderLinks);
pLdrDataEntry 包含有模块的全路径然后循环得到
detach进程 KeUnstackDetachProcess
另外就是 PsLookupProcessByProcessId得到 EPROCESS会增加引用计数这里减少即可
ObDereferenceObject(EPROCESS),EPROCESS=null;

通过EPROCESS +0x88得到下一个EPROCESS的ActiveProcessLinks
通过上面这个结构 - 0x88 就得到这个EPROCESS指针
然后循环进行遍历进程

typedef PPEB (__stdcall *PFNPsGetProcessPeb)(PEPROCESS pEProcess);
typedef ULONG PPS_POST_PROCESS_INIT_ROUTINE;    <div>
typedef struct _PEB_LDR_DATA {
BYTE    Reserved1;
PVOID    Reserved2;
LIST_ENTRY InMemoryOrderModuleList;
} PEB_LDR_DATA, *PPEB_LDR_DATA; </div><div>
typedef struct _RTL_USER_PROCESS_PARAMETERS {
BYTE       Reserved1;
PVOID       Reserved2;
UNICODE_STRING ImagePathName;
UNICODE_STRING CommandLine;
} RTL_USER_PROCESS_PARAMETERS, *PRTL_USER_PROCESS_PARAMETERS;

typedef struct _PEB {
BYTE                      Reserved1;
BYTE                      BeingDebugged;
BYTE                      Reserved2;
PVOID                      Reserved3;
PPEB_LDR_DATA             Ldr;
PRTL_USER_PROCESS_PARAMETERSProcessParameters;
BYTE                      Reserved4;
PVOID                      Reserved5;
PPS_POST_PROCESS_INIT_ROUTINE PostProcessInitRoutine;
BYTE                      Reserved6;
PVOID                      Reserved7;
ULONG                      SessionId;
} PEB, *PPEB;

typedef struct _LDR_DATA_TABLE_ENTRY
{
LIST_ENTRY InLoadOrderLinks;
LIST_ENTRY InMemoryOrderLinks;
LIST_ENTRY InInitializationOrderLinks;
PVOID DllBase;
PVOID EntryPoint;
DWORD SizeOfImage;
UNICODE_STRING FullDllName;
UNICODE_STRING BaseDllName;
DWORD Flags;
WORD LoadCount;
WORD TlsIndex;
LIST_ENTRY HashLinks;
PVOID SectionPointer;
DWORD CheckSum;
DWORD TimeDateStamp;
PVOID LoadedImports;
PVOID EntryPointActivationContext;
PVOID PatchInformation;
}LDR_DATA_TABLE_ENTRY,*PLDR_DATA_TABLE_ENTRY; </div>

主要功能代码：

NTSTATUS ScanModulebypid(ULONG ulProcessId)
{
//获取进程的EPROCESS结构指针
NTSTATUS nStatus;
PEPROCESSpEProcess = NULL;
nStatus = PsLookupProcessByProcessId((HANDLE)ulProcessId, &pEProcess);
if (!NT_SUCCESS(nStatus))
{
   return STATUS_UNSUCCESSFUL;
}

//查找函数地址
UNICODE_STRING uniFunctionName;
RtlInitUnicodeString(&uniFunctionName, L"PsGetProcessPeb");

//函数指针
PFNPsGetProcessPebPsGetProcessPeb = NULL;

PsGetProcessPeb = (PFNPsGetProcessPeb)MmGetSystemRoutineAddress(&uniFunctionName);
if (PsGetProcessPeb == NULL)
{
   KdPrint(("Get PsGetProcessPeb Failed~!\n"));
   return STATUS_UNSUCCESSFUL;
}

//获取PEB指针
PPEB pPEB = NULL;
pPEB = PsGetProcessPeb(pEProcess);

if (pPEB == NULL)
{
   KdPrint(("Get pPEB Failed~!\n"));
   return STATUS_UNSUCCESSFUL;
}

//保存APC状态APC，即Asynchronous procedure call，异步程序调用
KAPC_STATE KAPC ={0};
//附加到进程
KeStackAttachProcess(pEProcess, &KAPC);

//是否已经附加到进程
BOOLEAN bIsAttached = FALSE;

bIsAttached = TRUE;

//指向LDR
//LDR数据结构
PPEB_LDR_DATA pPebLdrData = NULL;
pPebLdrData = pPEB->Ldr;

//链表头节点、尾节点
PLIST_ENTRY pListEntryStart = NULL;
PLIST_ENTRY pListEntryEnd = NULL;
//头节点、尾节点
pListEntryStart = pListEntryEnd = pPebLdrData->InMemoryOrderModuleList.Flink;

//开始遍历_LDR_DATA_TABLE_ENTRY
//LDR链表入口
PLDR_DATA_TABLE_ENTRY pLdrDataEntry = NULL;
do
{
   //通过_LIST_ENTRY的Flink成员获取_LDR_DATA_TABLE_ENTRY结构

   pLdrDataEntry = (PLDR_DATA_TABLE_ENTRY)CONTAINING_RECORD(pListEntryStart,LDR_DATA_TABLE_ENTRY, InMemoryOrderLinks);

   //输出DLL全路径
   KdPrint(("%wZ \n", &pLdrDataEntry->FullDllName));

   pListEntryStart = pListEntryStart->Flink;

}while(pListEntryStart != pListEntryEnd);

KdPrint(("\n\n"));
//Detach进程
if (bIsAttached != FALSE)
{
   KeUnstackDetachProcess(&KAPC);
}

//减少引用计数
if (pEProcess != NULL)
{
   ObDereferenceObject(pEProcess);
   pEProcess = NULL;
}

return STATUS_SUCCESS;
}

NTSTATUS ScanProcessModule()
{
PEPROCESS eprocess,Firsteprocess;
ULONG ulProcessName;
ULONG ulProcessID;

KdPrint(("start ScanProcessModile\n"));
//__asm int 3;
eprocess = PsGetCurrentProcess();

Firsteprocess = eprocess;
if (eprocess == 0)
{
   KdPrint(("PsGetCurrentProcess error"));
   return STATUS_SUCCESS;
}
while (eprocess != NULL)
{
   ulProcessName = (ULONG)eprocess + 0x174;    // +0x174 ImageFileName : UChar
   ulProcessID = *(ULONG*)((ULONG)eprocess + 0x84);// +0x084 UniqueProcessId: Ptr32 Void
   KdPrint(("processname = %s,processid = %d \r \n",ulProcessName,ulProcessID));
   //if (!strcmp( (char*)(ULONG*)ulProcessName ,"notepad.exe"))
   //{
         ScanModulebypid(ulProcessID);
   //}

                                                   // +0x088 ActiveProcessLinks : _LIST_ENTRY
   eprocess = (PEPROCESS)(*(ULONG*)((ULONG)eprocess + 0x88) - 0x88);//-0x88是得到 eprocess结构

   if (eprocess == Firsteprocess || (*(LONG*)( (LONG)eprocess + 0x84) ) <0)//如果链表搜索完毕或者进程PID小于0则结束
   {
         break;
   }
}
return STATUS_SUCCESS;
}

删除指定进程：
方法1 卸载掉指定进程的NTDLL.dll 模块（这里以 notepad.exe 为例子）
extern "C"
NTSTATUS
MmUnmapViewOfSection(
                  IN PEPROCESS Process,
                  IN ULONG BaseAddress
                  );
NTSTATUS ScanProcessModule()
{
PEPROCESS eprocess,Firsteprocess;
ULONG ulProcessName;
ULONG ulProcessID;

KdPrint(("start ScanProcessModile\n"));
//__asm int 3;
eprocess = PsGetCurrentProcess();

Firsteprocess = eprocess;
if (eprocess == 0)
{
   KdPrint(("PsGetCurrentProcess error"));
   return STATUS_SUCCESS;
}
         PEPROCESS eprocess2;

while (eprocess != NULL)
{
   ulProcessName = (ULONG)eprocess + 0x174;    // +0x174 ImageFileName : UChar
   ulProcessID = *(ULONG*)((ULONG)eprocess + 0x84);// +0x084 UniqueProcessId: Ptr32 Void
   KdPrint(("processname = %s,processid = %d \r \n",ulProcessName,ulProcessID));


   if (!strcmp( (char*)(ULONG*)ulProcessName ,"notepad.exe"))
   {
         PsLookupProcessByProcessId((HANDLE)ulProcessID,&eprocess2);
         UNICODE_STRING uniPsGetProcessPeb;
         RtlInitUnicodeString(&uniPsGetProcessPeb,L"PsGetProcessPeb");

         PFNPsGetProcessPeb PsGetProcessPebAddr = (PFNPsGetProcessPeb)MmGetSystemRoutineAddress(&uniPsGetProcessPeb);
         if (PsGetProcessPebAddr == NULL)
         {
            KdPrint(("Get PsGetProcessPeb Failed~!\n"));
            return STATUS_UNSUCCESSFUL;
         }
         PPEB pPEB = NULL;
         pPEB = PsGetProcessPebAddr(eprocess2);
         if (pPEB == NULL)
         {
            KdPrint(("Get pPEB Failed~!\n"));
            return STATUS_UNSUCCESSFUL;
         }
         //保存APC状态APC，即Asynchronous procedure call，异步程序调用
         KAPC_STATE KAPC ={0};
         //附加到进程
         KeStackAttachProcess(eprocess2, &KAPC);

         //是否已经附加到进程
         BOOLEAN bIsAttached = FALSE;

         bIsAttached = TRUE;

         //指向LDR
         //LDR数据结构
         PPEB_LDR_DATA pPebLdrData = NULL;
         pPebLdrData = pPEB->Ldr;

         //链表头节点、尾节点
         PLIST_ENTRY pListEntryStart = NULL;
         PLIST_ENTRY pListEntryEnd = NULL;
         //头节点、尾节点
         pListEntryStart = pListEntryEnd = pPebLdrData->InMemoryOrderModuleList.Flink;

         //开始遍历_LDR_DATA_TABLE_ENTRY
         //LDR链表入口
         PLDR_DATA_TABLE_ENTRY pLdrDataEntry = NULL;
         do
         {
            //通过_LIST_ENTRY的Flink成员获取_LDR_DATA_TABLE_ENTRY结构

            pLdrDataEntry = (PLDR_DATA_TABLE_ENTRY)CONTAINING_RECORD(pListEntryStart,LDR_DATA_TABLE_ENTRY, InMemoryOrderLinks);

            //输出DLL全路径
            KdPrint(("%wZ \n", &pLdrDataEntry->FullDllName));
            UNICODE_STRING uniNtdll;
            RtlInitUnicodeString(&uniNtdll,L"ntdll.dll");

            if (RtlEqualUnicodeString(&pLdrDataEntry->BaseDllName,&uniNtdll,TRUE))
            {
               MmUnmapViewOfSection(eprocess2,(ULONG)(pLdrDataEntry->DllBase));
               KdPrint(("卸载 ntdll.dll 完成"));
            }
            pListEntryStart = pListEntryStart->Flink;

         }while(pListEntryStart != pListEntryEnd);

         //Detach进程
         if (bIsAttached != FALSE)
         {
            KeUnstackDetachProcess(&KAPC);
         }

         //减少引用计数
         if (eprocess2 != NULL)
         {
            ObDereferenceObject(eprocess2);
            eprocess2 = NULL;
         }

   }

   // +0x088 ActiveProcessLinks : _LIST_ENTRY
   eprocess = (PEPROCESS)(*(ULONG*)((ULONG)eprocess + 0x88) - 0x88);//-0x88是得到 eprocess结构

   if (eprocess == Firsteprocess || (*(LONG*)( (LONG)eprocess + 0x84) ) <0)//如果链表搜索完毕或者进程PID小于0则结束
   {
         break;
   }
}
return STATUS_SUCCESS;
}

页: [1]

看流星社区's Archiver

驱动枚举所有进程所有模块，删除指定进程。